Dishwasher Lower Spray Arm - Inox - 60cm

Dishwasher Lower Spray Arm - Inox - 60cm

Important: Use the "Check this part fits your appliance" box above to make sure this product fits your appliance.

Most dishwasher spray arms are designed to be removed and cleaned by the owner and are therefore almost always a very easy part to replace if they are faulty.

The most common spray arms will be fitted with a nut of sorts or simple clip that is easy to release to hold them in position but still allowing them to spin freely, The spray arms must be able to rotate easily of your dishwasher will not clean the load correctly.

They will be fitted onto what is usually referred to as a spray arm support or, for many upper spray arms, a feed tube or pipe that deliveres the water pumped from the main motor or recirculation pump and it is the force of that delivery of water that drives the spray arms around.

Common faults with spray arms are that they can become blocked and cannot be cleared or that the spray arm simply wears out and water escapes degrading the performance of your dishwasher.

If your dishwasher is cleaning poorly, not performing as well as you think it should be then please see our general dishwasher care and maintenance guide and try the steps there before buying replacement parts, it may save you some time and money.

This part is a genuine spare part made by the original manufacturer.

Always unplug your appliance before beginning work and replacing any parts.